|
|
|
Circulation Fans |
|
|

|
|
Barnstormer
High Output Performance High Efficiency Air Circulators
J&D’s Barnstormer fan has been a leader in air
performance and dependability. The tapered side guard condenses
the exhaust air into a tight air stream that creates a higher
velocity and throws air much further than conventional basket
fans. The front guard is further from the blade than most basket
fans, allowing for increased wire spacing that reduces air
resistance up to 40%. Put the two together and you get the World’s
Very Best Basket Fan. Our exceptional fan velocity allows
for further distance between fans, which means fewer fans.
Whenever you inject moisture into a closed building, you must
have a proper air exchange strategy. Call J&D Manufacturing’s
team of ventilation design engineers to design the proper system
for you.
In some states, mist rings can only
be installed on fans that are UL507 Outdoor Certified. Call J&D
Manufacturing for the largest selection of low cost and high performance
UL507 Certified fans.
- Lowers maintenance cost up to 75%
- Industry leading air velocity
- Quiet Operation
- No belts or bearings to maintain!
- OSHA approved when mounted 7’ above floor level
- Fan and guards come completely assembled.
- Variable speed motors on 12”–24” models,
single speed motors on 36” models.
- Totally enclosed, maintenance free, direct drive high efficiency
motors have completely sealed ball bearings, UL and ULC certification,
built in automatic thermal overload protection, covered by a
Full Two Year Warranty.
- Three phase models have automatic overload protection
- Exclusive Open Front patented design, U.S. patent No. 5,348,447.
- Nearly all J&D Manufacturing re-circulation fans can be
used with our misting/fogging product line.
Exclusive Open Front Guard
U.S. Patent No. 5,348,447
The Barnstormer is the only fan on the market with the exclusive
hinged open front guard feature. This patented design helps cut
cleaning and maintenance time by 75%. No tools. No down time.
Dirt or dust build-up removed in minutes. Back to full energy
efficient, high–output
operation.
| Part# |
Size |
HP |
Volt |
Phs |
CFM |
CFM
/Watt |
Price |
| High |
Low |
High |
Low |
| VBS12 |
12" |
1/10 |
115/230 |
1 |
2600 |
910 |
16 |
12 |
$145.00 |
 |
| VBS20 |
20" |
1/3 |
115/230 |
1 |
6000 |
2100 |
16 |
12 |
$193.33 |
 |
| VBS24 |
24" |
1/2 |
115/230 |
1 |
8500 |
2975 |
17 |
13 |
$226.67 |
 |
| VBS36A |
36" |
1/2 |
115/230 |
1 |
13500 |
23.2 |
$276.67 |
 |
| VBS36CF |
36" |
1/2 |
230/460 |
3 |
13500 |
23.2 |
$281.67 |
 |
| Fans include a U-bolt and nuts with
standard bracket |
| Model |
Description |
Price |
| SIDE MOUNT BRACKETS |
| VRSBR14 |
42” Extended Bracket, fits Square/
Round Post |
$80.00 |
 |
| VRSBR143 |
42” Extended Bracket, fits 3” Pipe – Bolt
On |
$80.00 |
 |
| VRSBR144 |
42” Extended Bracket, fits 4” Pipe – Bolt
On |
$80.00 |
 |
| VRSBR14412 |
42” Extended Bracket, fits 4 1/2” Pipe – Bolt
On |
$80.00 |
 |
| CEILING MOUNT BRACKETS |
| VRSBR2 |
6-Way
Bracket for 12”–24” Fans |
$31.67 |
 |
| VRSBR3 |
6-Way Bracket for 36” Fan |
$33.17 |
 |
| VRSBR6 |
Standard Ceiling Bracket w/ Flag
Mount for 30" - 36" Fans |
$23.33 |
 |
| POLE MOUNT BRACKETS |
| VRSBR12 |
Pole Bracket
fits 4” - 4 1/2” Tube |
$24.17 |
 |
| VRSBR13 |
Pole Bracket, fits
3” - 3 1/2” Tube |
$24.17 |
 |
| STANDARD L BRACKETS
|
| VRSBR736 |
Standard Flag
Mount Bracket for 12”–16” Fans |
$8.75 |
 |
| VRSBR5 |
Standard Flag
Mount Bracket 20”–24” Fans |
$10.38 |
 |
|

36" Model

24" Model
|
|
The Poly Chiller™
J&D Manufacturing’s specialized team of ventilation
engineers have created the MOST efficient venturi in the world
ever designed for a recirculation fan. The one piece polyethylene
housing is formed into a unique shape that actually helps draw
The Poly Chiller™ air out of the venturi, throwing air
further and reducing the load on the motor and blade by up to
15%. This allows us to increase the pitch and performance without
overloading the motor. The smooth shape of the venturi is extremely
easy to clean with no corners for bacteria or dirt to build–up
in. The motor and blade are supported by a heavy duty mount which
is directly attached to the multi adjustment bracket. This means
the poly housing is not part of the support structure avoiding
venturi distortion like other poly housing fans. Our bracket
allows you to tilt and lock the fan angle on the sides along
with the ceiling multi–positioning bracket. The Poly Chiller
comes standard with a unique OSHA guard which is designed to
create less restriction and is spaced wide enough to resist dirt
built–up.
Gold medal performance in air movement, efficiency usage, versatility,
corrosion resistant, safety and easy to clean. Once again J&D
Manufacturing has set a new standard and we are blowing the competition
away!
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Air exchange when placed in a wall opening or in open sidewall
buildings
- Consistent air temperature throughout a room or building
- Heat stress relief indoors and outdoors for young and old
- Surface drying (including animal bedding)
- People and animal cooling
- Machine/compressor cooling
- High velocity air cooling
- Insect control
- Air curtains
- GOLD MEDAL PERFORMANCE of 14,300 CCFM with 1/2 hp motor,
23.8 CCFM per WATT, creates an air pattern that is unequaled
in today’s market
- Three winged galvanized blade
- Fan and guards come completely assembled.
- OSHA approved guard for installations below and above 7 feet
- One piece polyethylene housing with UV inhibitors, no rust,
easy to clean with no corners for bacteria or dirt to build–up
in.
- Heavy duty powder coated, corrosion resistant, multi–position
support bracket, motor mount and guard.
- Totally enclosed, maintenance free, direct drive high efficiency
motors have completely sealed ball bearings, UL and ULC certification,
built in automatic thermal overload protection, covered by a Full
Two Year Warranty.
| Part# |
Volt |
Phs |
CFM |
CFM
/Watt |
Cord |
Price |
| High |
Low |
High |
Low |
| 24",
1/2 HP, Bracket Included |
| VPRF24 |
115/230 |
1 |
10200 |
3000 |
18 |
14 |
NO |
$365.83 |
 |
| VPRF24-C115 |
115 |
1 |
10200 |
3000 |
18 |
14 |
10' |
$375.00 |
 |
| VPRF24-C230 |
230 |
1 |
10200 |
3000 |
18 |
14 |
10' |
$381.67 |
 |
| 36", 1/2 HP,
Bracket Included |
| VPRF36 |
115/230 |
1 |
15300 |
26 |
N0 |
$481.67 |
 |
| VPRF363 |
230/460 |
1 |
15300 |
26 |
NO |
$496.67 |
 |
| VPRF36-C115 |
115 |
1 |
15300 |
26 |
10' |
$490.83 |
 |
| VPRF36-C230 |
230 |
1 |
15300 |
26 |
10' |
$497.50 |
 |
| PART
# |
DESCRIPTION |
PRICE |
| Optional
Poly Chiller Brackets |
| VRSBRD36B |
Wall
or Post mount bracket for 24” or 36” Poly Chiller
|
$49.83 |
 |
| VRSBRD36C |
4 1/2” Column
mount bracket for 24” or 36” Poly Chiller |
$49.83 |
 |
|

|
|
Explosion Proof High Output
Deluxe Basket Fan
Explosion proof fans are ideal for
paint booths, grain storage dryers, animal gases and explosion
environment applications. Our Deluxe Basket Fan Series
combines high output performance, low cost and maintenance
and energy efficiency to give you one of our best valued fan
series. It gives a high velocity air pattern with quiet operation.
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Consistent air temperature throughout a room or building
- Explosion Proof in:
Class I Group D
Class II Group F&G
Class I Zone I Group IIA
- OSHA approved guard for installations below and above 7 feet
- Corrosion resistant powder coated guards and brackets
- Fan and guards come completely assembled.
- Optional ceiling mount brackets available (see below)
- Explosion Proof, totally enclosed, maintenance free, direct
drive high efficiency motors have completely sealed ball bearings,
UL and ULC certification, built in automatic thermal overload
protection, covered by a Full Two Year Warranty.
| Part# |
Size |
HP |
Volt |
Phs |
CFM |
CFM
/Watt |
Price |
| VDX24HOB |
24" |
1/2 |
115/230 |
1 |
6800 |
15 |
$548.33 |
 |
| VDX24HOB3 |
24" |
1/2 |
230/460 |
3 |
6800 |
15 |
$565.00 |
 |
| VDX30HOB |
30" |
1/2 |
115/230 |
1 |
6800 |
15 |
$565.00 |
 |
| VDX30HOB3 |
30" |
1/2 |
230/460 |
3 |
6800 |
15 |
$581.67 |
 |
| PART# |
Description |
Price |
| VRSBR5 |
Standard Flag Mount Bracket 20”–24” Fans |
$10.38 |
 |
| VRSBR6 |
Standard Ceiling Bracket w/ Flag Mount
for 30" - 36" Fans |
$23.33 |
 |
|

|
|
Heavy-duty Industrial Wall/Ceiling/Pole
Mount Fan
Our Heavy-duty Industrial Series is an industry leader in air
performance. In today’s market many retail fans look powerful,
but move very little air. Not true with our Heavy-duty Industrial
Series which is designed for the industrial market where performance
is mandatory for employee comfort and machine efficiency. Available
in Safety Yellow, White or Black with a powerful single or two
speed motor.
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Air exchange when placed in a wall opening or in open sidewall
buildings
- Consistent air temperature throughout a room or building
- Heat stress relief indoors and outdoors for young and old
- Surface drying
- People cooling
- Machine/compressor cooling
- High velocity air cooling
- Insect control
- Air curtains
- 30” fan with 1/2 HP high output performance motor
- Versatile mounting brackets allow for multiple placement and
user options
- Guards meet OSHA standard
- Corrosion resistant powder coated guards and brackets
- Fan and guards come completely assembled
- Fan heads available in high visibility safety yellow, black
or white
- Single and two speed motors with pull chain
- Oscillating and non–oscillating models
- Quiet Operation
- All models come with a cord and grounded 3–prong plug
prewired for 115V
- Totally enclosed, maintenance free, 2 speed direct drive high
efficiency motors have completely sealed ball bearings, UL and
ULC certification, built in automatic thermal overload protection,
covered by a Full Two Year Warranty.
- Can be used with our misting/fogging product line.
| Part# |
Size |
HP |
Volt |
Phs |
CFM |
CFM /Watt |
Price |
| Oscillating and Non-Oscillating
models available. |
| VDF20HOB2 |
20" |
1/4 |
115 |
1 |
6800 |
5000 |
18 |
14 |
$165.00 |
 |
| VDF24HOB2 |
24" |
1/4 |
115 |
1 |
6800 |
5000 |
18 |
14 |
$181.67 |
 |
| VDF30HOB2 |
30" |
1/2 |
115 |
1 |
9800 |
7900 |
20 |
16 |
$231.67 |
 |
| Order mounting brackets
separately |
| Model |
Description |
Price |
| SIDE MOUNT BRACKETS |
| VRSBR14 |
42” Extended Bracket, fits Square/
Round Post |
$80.00 |
 |
| VRSBR143 |
42” Extended Bracket, fits 3” Pipe – Bolt
On |
$80.00 |
 |
| VRSBR144 |
42” Extended Bracket, fits 4” Pipe – Bolt
On |
$80.00 |
 |
| VRSBR14412 |
42” Extended Bracket, fits 4 1/2” Pipe – Bolt
On |
$80.00 |
 |
| VRSBR901 |
Wall Mount Bracket for 12" - 36" Fans |
$24.17 |
 |
| CEILING MOUNT BRACKETS |
| VRSBR2 |
6-Way Bracket for 12”–24” Fans |
$31.67 |
 |
| VRSBR3 |
6-Way Bracket for 36” Fan |
$33.17 |
 |
| VRSBR6 |
Standard Ceiling Bracket w/ Flag Mount
for 30" - 36" Fans |
$23.33 |
 |
| POLE MOUNT BRACKETS |
| VRSBR12 |
Pole Bracket fits 4” - 4 1/2” Tube |
$24.17 |
 |
| VRSBR13 |
Pole Bracket, fits 3” - 3 1/2” Tube |
$24.17 |
 |
| STANDARD L BRACKETS |
| VRSBR5 |
Standard Flag Mount Bracket 20”–24” Fans |
$10.38 |
 |
|


|
|
Indoor/Outdoor UL507 Certified
Wall/Ceiling/Pedestal Fans
J&D Manufacturing has developed a new line of Premium Outdoor
Waterproof fans. In the past you would pay 3-4 times the regular
price to get fans for outdoor applications. Not anymore with
our new outdoor series. Some states have changed electrical standards
so when a misting/fogging device is now attached to a fan, the
motor must be UL507 or Outdoor Certified. J&D Manufacturing
is the only company in the world with a High Output Performance
low cost fan that meets this certification. We recommend all
of our outdoor fans have a GFCI (Ground Fault Circuit Interrupter)
in all circuits.
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Air exchange when placed in a wall opening or in open sidewall
buildings
- Consistent air temperature throughout a room or building
- Heat stress relief indoors and outdoors for young and old
- Surface drying (including animal bedding)
- People and animal cooling
- Machine/compressor cooling
- High velocity air cooling
- Insect control
- Air curtains
- High Output Performance
- 3–Speed pull chain
- Cord included on all models
- UL507 Certified for indoor and outdoor use
- White aluminum blades
- Powder coated guards and brackets for corrosion resistance
- Quiet operation
- Meets OSHA standards
- Totally enclosed, maintenance free, direct drive high efficiency
motors have completely sealed ball bearings, UL and ULC certification,
built in automatic thermal overload protection, covered by a Full
One Year Warranty.
- Can be used with our misting/fogging products to increase cooling
abilities
| Part# |
Size |
HP |
Volt |
Phs |
CFM |
CFM
/Watt |
Price |
| High/Med/Low |
High/Med/Low |
| POW14 |
14" |
1/8 |
115 |
1 |
4000/3300/2600 |
28/25/22 |
$82.92 |
 |
| POW18 |
18" |
1/3 |
115 |
1 |
6600/4800/3800 |
32/28/24 |
$103.33 |
 |
| Optional Brackets
Sold Separately |
|

|
|
PREMIUM WALL MOUNT FAN WITH
BRACKET
J&D Manufacturing’s Extreme
Air Premium Wall Mount fans are considered the industries best
value performance fan. Although they are not as powerful as
our Heavy duty series performance fans, they still blow our
competition away. The tilting head with a wall mount allows
you to direct the high velocity air where you need it most.
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Air exchange when placed in a wall opening or in open sidewall
buildings
- Consistent air temperature throughout a room or building
- Heat stress relief indoors and outdoors for young and old
- Surface drying
- People cooling
- Machine/compressor cooling
- High velocity air cooling
- Insect control
- Air curtains
- All Metal Construction with chrome finish, black blade and
wall mount
- Aluminum blade increases air flow and motor Life
- 3–Speed pull chain switch
- Adjustable wall mount
- Oscillating and non–oscillating models
- Meets OSHA standards
- Quiet operation
- 12' Grounded 3–prong plug
- Maintenance free, direct drive high efficiency motors have
completely sealed ball bearings, UL and ULC certification, built
in automatic thermal overload protection, covered by a Full
One Year Warranty.
- Almost all J&D Manufacturing re-circulation fans can be
used with our misting/fogging product line.
| Part# |
Size |
HP |
Volt |
CFM |
CFM
/Watt |
Price |
| High/Med/Low |
High/Med/Low |
| Non-Oscillating Models |
| PW24 |
24" |
1/3 |
115 |
7200/6200/5200 |
32/28/24 |
$165.00 |
 |
| PW30 |
30" |
1/3 |
115 |
8200/7200/6200 |
32/28/24 |
$173.33 |
 |
| Oscillating
Models |
| PW24OSC |
24" |
1/3 |
115 |
7200/6200/5200 |
32/28/24 |
$165.00 |
 |
| PW30OSC |
30" |
1/3 |
115 |
8200/7200/6200 |
32/28/24 |
$173.33 |
 |
|

12" Model Shown
|
|
GREEN BREEZE HAF FANS
Greenhouses need a specialized HAF Fan and J&D Manufacturing’s
Green Breeze Series is the BEST. Our narrowing guard creates
a tight air pattern that throws air twice as far as regular HAF
fans. Our patented (U.S. Patent No. 5,348,4471) easy open front
guard with wide spacing, means your maintenance costs are reduced
by 75% and no tools required. The adjustable mounting bracket
attaches directly to the motor yoke to eliminate vibration. Our
easy adjustment along with variable speed operation (12” to
24” models) allows you to quickly adapt each fan to your
changing environment. In the winter, use the fan blowing above
the plants to move air throughout the greenhouse to create a
uniform temperature. Adjust the air pattern and reduce fan speed
towards plants that you may want to harden before shipping to
market. Low velocity air can be used to stimulate hair follicle
for improving plants health, but make sure not to dry the plant
on high speed. Our fans create a high velocity air pattern that
repels insects. The J&D Manufacturing Green Breeze is the
most versatile, energy efficient, lowest maintenance and best
value HAF fan available today.
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Air exchange when placed in a wall opening or in open sidewall
buildings
- Consistent air temperature throughout a room or building
- Insect control
- Air curtains
- No belts or bearings to maintain!
- Three winged aluminum blade
- Available in 12”, 20” and 24”
- OSHA approved when mounted 7’ above floor level
- Fan and guards come completely assembled.
- Exclusive Open Front Guard patented design, U.S. patent No.
5,348,447 lowers maintenance cost up to 75%
- Mounting bracket mounts directly to the yoke of motor to eliminate
any vibration for smooth fan operation.
- Provides constant temperature and helps to eliminate hot and
cold spots throughout the greenhouse.
- Corrosion resistant white powder coated fan guard and black
brackets.
- Specially designed guard allows more air flow for optimum air
circulation and quiet operation.
- Variable speed motors (12”–24”) for year
round air circulation.
- 6' Cord, 3–Prong Plug attached
- Totally enclosed, maintenance free, direct drive high efficiency
motors have completely sealed ball bearings, UL and ULC certification,
built in automatic thermal overload protection, covered by a
Full Two Year Warranty.
- Nearly all J&D Manufacturing recirculation fans can be
used with our misting/fogging product line.
EXCLUSIVE Open Front Guard
The Green Breeze is the only fan on the market with the exclusive
open front feature. It’s unique design helps cut cleaning
and maintenance time by 75%. No tools. No down time. Back to
full energy efficient, high–output operation. U.S. patent
No. 5,348,447
Spacing for optimum performance
VBG12: 30' or less
VBG20: 40' or less
VBG24: 50' or less
| Part# |
Size |
HP |
Volt |
Phs |
CFM |
CFM
/Watt |
Price |
| High |
Low |
High |
Low |
| VBG12 |
12" |
1/10 |
115/230 |
1 |
2600 |
900 |
16 |
12 |
$148.33 |
 |
| VBG20 |
20" |
1/3 |
115/230 |
1 |
6000 |
2100 |
16 |
12 |
$198.33 |
 |
| VBG24 |
24" |
1/2 |
115/230 |
1 |
8500 |
2975 |
17 |
13 |
$232.50 |
 |
| 6' cord and L Bracket
with U-bolt and nuts included |
| Optional Mounting Brackets |
| VRSBR19 |
Twist Bracket |
$16.25 |
 |
| HD10294 |
U-Bolt, 5/16 x 2 1/2" I.D. |
$1.00 |
 |
| HD10046 |
Nuts for U-Bolt, Nylock,
5/16 |
$0.10 |
 |
| POWTPB |
Greenhouse and tent pole
bracket (for 14" and 18" POW fans). Include U-bolt
and nuts. |
$14.17 |
 |
|

|
|
PREMIUM PEDESTAL FAN
J&D Manufacturing’s
Extreme Air Premium Pedestal fans are considered the best value
performance fans. Although they are not as powerful as our Heavy-Duty
Series fans, they still blow our competition away. Heavy metal
base and pole provide a stable and safe operation. Our quiet
but powerful motor/blade combination gives smooth and industry
leading performance.
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Air exchange when placed in a wall opening or in open sidewall
buildings
- Consistent air temperature throughout a room or building
- Heat stress relief indoors and outdoors for young and old
- Surface drying
- People cooling
- Machine/compressor cooling
- High velocity air cooling
- Insect control
- Air curtains
- 3-Speed pull chain control
- Powder coated corrosion resistant base and pole finish
- Chrome plated adjustable insert pole
- Aluminum blade increases air flow and motor life
- Toolless ergonomic tilt adjustment knobs
- 12' Grounded 3–prong plug attached (20" Models have
a 6' 6" Grounded 3–prong plug)
- Easy roll wheels (20" model only)
- Oscillating and non–oscillating models
- Fan and guards come completely assembled
- Maintenance free, direct drive high efficiency motors have
completely sealed ball bearings, UL and ULC certification, built
in automatic thermal overload protection, covered by a Full
One Year Warranty.
| PART# |
SIZE |
HP |
VOLT |
RPM |
CORD |
PRICE |
| HI |
MED |
LOW |
| NON OSCILLATING |
| PPHVF20 |
20" |
1/4 |
115 |
1527 |
1349 |
1141 |
6'6" |
$125.00 |
 |
| PPHVF24 |
24" |
1/3 |
115 |
1580 |
1240 |
830 |
12' |
$155.83 |
 |
| PPHVF30 |
30" |
1/3 |
115 |
1580 |
1240 |
830 |
12' |
$180.00 |
 |
| OSCILLATING |
| PPHVF24OSC |
24" |
1/3 |
115 |
1580 |
1240 |
830 |
12' |
$199.17 |
 |
| PPHVF30OSC |
24" |
1/3 |
115 |
1580 |
1240 |
830 |
12' |
$205.00 |
 |
|

|
|
HEAVY–DUTY INDUSTRIAL
PEDESTAL FAN
Our Heavy-duty Pedestal Series is industry
leading in Air Performance. In today’s market, many retail
fans look like fans, but move very little air. Not true with
our Heavy-duty series which is designed for the industrial
market where performance is mandatory for employee comfort
or machine efficiency. The heavy duty base with strong 3" poly
wheels makes our pedestal fans stable and easy transport. All
units come with a powerful two speed motor, 1/4 HP on 24" and
a 1/2 HP on 30" models.
When it comes to transferring electrical energy efficiently into
air energy for cooling, air recirculation or air movement, J&D
Manufacturing is the world leader.
J&D Manufacturing re-circulation fans when applied properly
can be used in the following applications:
- Air de-stratification can help reduce heating and cooling
bills by up to 25%
- Air exchange when placed in a wall opening or in open sidewall
buildings
- Consistent air temperature throughout a room or building
- Heat stress relief indoors and outdoors for young and old
- Machine/compressor cooling
- Surface drying
- People cooling
- High velocity air cooling
- Insect control
- Air curtains
- Quiet Operationl
- Guards meet OSHA standards
- Heavy duty pedestal mount with chrome insert tube
- Heavy-duty powder coated corrosion resistant guards and base
- Powder coated corrosion resistant, fan/pole-base available
in high visibility Safety Yellow, White or Black
- 3" Poly wheels included
- 12' Power cord with cord wrap
- 30" fans have 1/2 HP high output performance motor.
- Totally enclosed, maintenance free, direct drive high efficiency
motors have completely sealed ball bearings, UL and ULC certification,
built in automatic thermal overload protection, covered by a Full
Two Year Warranty.
| PART# |
SIZE |
HP |
VOLT |
RPM |
CORD |
PRICE |
| HI |
LOW |
| NON OSCILLATING |
| VDF24W |
24" |
1/4 |
115 |
1100 |
900 |
12' |
$269.50 |
 |
| VDF30W |
30" |
1/2 |
115 |
1100 |
900 |
12' |
$311.50 |
 |
| OSCILLATING |
| VDF241W |
24" |
1/4 |
115 |
1100 |
900 |
12' |
$288.75 |
 |
| VDF301W |
24" |
1/2 |
115 |
1100 |
900 |
12' |
$330.75 |
 |
|
| |