- per page
Automatic Temperature Adjusting Variable Output Control
The MTC4C-C automatic adjusting variable output control with 8' Male, 18? Female cord is designed to modulate the speed of a variable speed fan when the temperature changes. As the temperature increases the fan speeds up and when the temperature drops the fan slows down. Once you hit your set point the fan shuts off automatically, ideal for variable speed exhaust fans and recirculation fans. This model comes complete with male/female cord. The plastic NEMA 4 housing complete with minimum speed adjustment knob and temperature setting knob.It can be installed in hog, poultry, dairy barns, greenhouses, high moisture applications, industrial and commercial buildings. You just plug the male plug into the wall receptacle and then plug the fan into the female cord. When using on an existing circuit you must make sure the circuit will handle the amp load capacity. With variable speed exhaust fans, when setting the minimum speed the shutter must be opened at least 1".
Features
* NEMA 4 Enclosure
* 8' Male, 18? Female cord 115 Volt
* Variable output
* Automatic temperature sensor
* CSA approved
* Minimum speed adjustment
* Rated 115/230 Volt
* 10 Amps
Note: All MTC4-C controls are wired for 115 Volt. If you want to use for any other voltage the cord can be removed and hard wired. We recommend using a qualified electrician for this or purchase our MTC4.
All controls should never be loaded by more than 80% of the motor, light or heat lamp nameplate current amps.
Features
* NEMA 4 Enclosure
* 8' Male, 18? Female cord 115 Volt
* Variable output
* Automatic temperature sensor
* CSA approved
* Minimum speed adjustment
* Rated 115/230 Volt
* 10 Amps
Note: All MTC4-C controls are wired for 115 Volt. If you want to use for any other voltage the cord can be removed and hard wired. We recommend using a qualified electrician for this or purchase our MTC4.
All controls should never be loaded by more than 80% of the motor, light or heat lamp nameplate current amps.
**Applicable Shipping Charges and Tax will be added.
Our price: $240.00
Our price: $240.00
Manual Variable Output Control with Cord
The MSC4?C control is a high amp capacity, dual voltage manual variable control that is compatible with PSC variable motors, light dimming or heat lamps. This model comes complete with an 8' piggy back cord. The plastic NEMA 4 housing comes complete with on/off switch and is rated for 12.5 amps, which gives 10amps of loading capacity. Ideal for variable speed exhaust and re-circulation fans.
The MSC4?C can be installed in hog, poultry, dairy barns, greenhouses, high moisture applications, industrial and commercial buildings. You just plug the control into the wall receptacle and then plug the fan , light or heat lamp into the back of the control. When using an existing circuit you must make sure the circuit will handle the amp load capacity.
Features
* NEMA 4 Enclosure
* 8' Piggy back cord 115 Volt
* 2 year limited warranty
* Variable output
* CSA approved
* On/off switch
* Rated 120/240volt
* 12.5 Amps
Note: All MSC4-C controls and are wired for 120 volt. If you want to use for any other voltage the cord can be removed and rewired. We recommend using a qualified electrician for this or purchase our MSC4 without cord.
The MSC4?C can be installed in hog, poultry, dairy barns, greenhouses, high moisture applications, industrial and commercial buildings. You just plug the control into the wall receptacle and then plug the fan , light or heat lamp into the back of the control. When using an existing circuit you must make sure the circuit will handle the amp load capacity.
Features
* NEMA 4 Enclosure
* 8' Piggy back cord 115 Volt
* 2 year limited warranty
* Variable output
* CSA approved
* On/off switch
* Rated 120/240volt
* 12.5 Amps
Note: All MSC4-C controls and are wired for 120 volt. If you want to use for any other voltage the cord can be removed and rewired. We recommend using a qualified electrician for this or purchase our MSC4 without cord.
**Applicable Shipping Charges and Tax will be added.
Our price: $163.33
Our price: $163.33
Moisture Proof Thermostat
These thermostats are intended for applications that need a rugged, weather-proof type control.
Features & Benefits
* Rugged weather resistant enclosure made of corrosion resistant materials for long life
* Low mass, high surface area of stainless steel coiled sensor provides rapid response to temperature change
* Large, visible dial with 40??100?F temperature range
* Underwriters Laboratories (UL) listed and CSA certified
Features & Benefits
* Rugged weather resistant enclosure made of corrosion resistant materials for long life
* Low mass, high surface area of stainless steel coiled sensor provides rapid response to temperature change
* Large, visible dial with 40??100?F temperature range
* Underwriters Laboratories (UL) listed and CSA certified
**Applicable Shipping Charges and Tax will be added.
Our price: $148.33
Our price: $148.33
Moisture Proof Thermostat -
These thermostats are intended for applications that need a rugged, weather-proof type control.
Features & Benefits
* Rugged weather resistant enclosure made of corrosion resistant materials for long life
* Low mass, high surface area of stainless steel coiled sensor provides rapid response to temperature change
* Large, visible dial with 40??100?F temperature range
* Underwriters Laboratories (UL) listed and CSA certified
Features & Benefits
* Rugged weather resistant enclosure made of corrosion resistant materials for long life
* Low mass, high surface area of stainless steel coiled sensor provides rapid response to temperature change
* Large, visible dial with 40??100?F temperature range
* Underwriters Laboratories (UL) listed and CSA certified
**Applicable Shipping Charges and Tax will be added.
Our price: $48.33
Our price: $48.33
PHASON CONTROLS
PHASON CONTROLS - MSC4
A simple, inexpensive variable speed control
The MSC-4 is an electronic manual speed control which allows the speed to be adjusted in ventilation and heat exchanger equipment to optimize the performance of this equipment. It may also be used as a light dimmer for brooder heat lamps and can power up to five 250 Watt lamps. The MSC-4 may be used in industrial, commercial or agricultural buildings.
Features
* 1 Variable Speed Output 12.5 Amps
* Minimum/Maximum calibration
* On/Off switch
* Electrical Rating: 115/230 VAC
* 2 year limited warranty
* Minimum speed adjustment
* Rated 115/230 Volt
* 10 Amps
A simple, inexpensive variable speed control
The MSC-4 is an electronic manual speed control which allows the speed to be adjusted in ventilation and heat exchanger equipment to optimize the performance of this equipment. It may also be used as a light dimmer for brooder heat lamps and can power up to five 250 Watt lamps. The MSC-4 may be used in industrial, commercial or agricultural buildings.
Features
* 1 Variable Speed Output 12.5 Amps
* Minimum/Maximum calibration
* On/Off switch
* Electrical Rating: 115/230 VAC
* 2 year limited warranty
* Minimum speed adjustment
* Rated 115/230 Volt
* 10 Amps
**Applicable Shipping Charges and Tax will be added.
Our price: $143.07
Our price: $143.07
PHASON CONTROLS - FHC1D
Variable Temperature Control
The FHC-1D automatically controls temperatures by varying the speed of ventilation fans and controlling heating systems.
Features
* 1 Variable Speed Output 10 FLA
* Heater Interlock Relay (10 FLA)
* Extendable Temperature Sensor
* Heat ON at 2 degrees below temperature set point
* Temperatures displayed in Fahrenheit or Celsius
* Adjustable Differential
* Adjustable idle
* 3 Second Full Power Turn-On minimizes fan motor ice up
* Electrical Rating: 115/230 VAC
* 2 year limited warranty
The FHC-1D automatically controls temperatures by varying the speed of ventilation fans and controlling heating systems.
Features
* 1 Variable Speed Output 10 FLA
* Heater Interlock Relay (10 FLA)
* Extendable Temperature Sensor
* Heat ON at 2 degrees below temperature set point
* Temperatures displayed in Fahrenheit or Celsius
* Adjustable Differential
* Adjustable idle
* 3 Second Full Power Turn-On minimizes fan motor ice up
* Electrical Rating: 115/230 VAC
* 2 year limited warranty
**Applicable Shipping Charges and Tax will be added.
Our price: $353.95
Our price: $353.95
PHASON CONTROLS - VTC1D
Variable Temperature Control
The VTC-1D is a microprocessor based temperature control that automatically controls temperatures by varying ventilation fan speeds. The control can be internally adjusted to leave fan idling or to shut off the fan when the temperature falls below the Temperature Set Point. The Shut Off temperature is adjustable (Off Setback).
Features
* 1 Variable Speed output 10 FLA
* Extendable Temperature Sensor
* Temperature Setting adjustable from 32-99?F or 0-38?F
* 3 Second Full Power Turn-On minimizes fan motor ice up
* Temperatures displayed in Fahrenheit or Celsius
* Adjustable Differential
* Adjustable Idle (0-99% of line voltage)
* Adjustable Off Setback
* Displayed Trouble Shooting Codes
* Electrical Rating: 115/230 VAC
* 2 year limited warranty
The VTC-1D is a microprocessor based temperature control that automatically controls temperatures by varying ventilation fan speeds. The control can be internally adjusted to leave fan idling or to shut off the fan when the temperature falls below the Temperature Set Point. The Shut Off temperature is adjustable (Off Setback).
Features
* 1 Variable Speed output 10 FLA
* Extendable Temperature Sensor
* Temperature Setting adjustable from 32-99?F or 0-38?F
* 3 Second Full Power Turn-On minimizes fan motor ice up
* Temperatures displayed in Fahrenheit or Celsius
* Adjustable Differential
* Adjustable Idle (0-99% of line voltage)
* Adjustable Off Setback
* Displayed Trouble Shooting Codes
* Electrical Rating: 115/230 VAC
* 2 year limited warranty
**Applicable Shipping Charges and Tax will be added.
Our price: $327.23
Our price: $327.23
Single Stage Thermostat
Our VC141 Thermostat with digital display and remote sensor is ideal for controlling exhaust fans, recirculation fans, inlets, cooling devices and heaters. It has a plastic NEMA 4 housing, adjustable temperature differential and is programmable.
Features & Benefits
* NEMA 4 enclosures
* Use for heating or cooling
* Remote sensor with 8' cable
* Digital temperature display
* Touch pad control settings
* Settings retained during power failure
* Adjustable differential 1?F to 30?F
* Temperature range ?30?F to 220?F
Features & Benefits
* NEMA 4 enclosures
* Use for heating or cooling
* Remote sensor with 8' cable
* Digital temperature display
* Touch pad control settings
* Settings retained during power failure
* Adjustable differential 1?F to 30?F
* Temperature range ?30?F to 220?F
**Applicable Shipping Charges and Tax will be added.
Our price: $83.33
Our price: $83.33
Single Stage Thermostat
Our VC15 single stage thermostats that can be used for heating or cooling. The plastic NEMA 4 housing with stainless steel sensor is ideal for any harsh environment or high moisture applications. Also available pre-wired at 115v with piggyback cord.
Features & Benefits
* NEMA 4 enclosures
* Stainless Steel Sensor
* Comes with water proof wind connectors
* Heating or Cooling
* CSA NRTLC UL Equipment
* One year warranty
* 12 Amps
* Maximum ambient 120?F or 50?C
* Temperature range 32?F?104?F, O?C?40?C
Features & Benefits
* NEMA 4 enclosures
* Stainless Steel Sensor
* Comes with water proof wind connectors
* Heating or Cooling
* CSA NRTLC UL Equipment
* One year warranty
* 12 Amps
* Maximum ambient 120?F or 50?C
* Temperature range 32?F?104?F, O?C?40?C
**Applicable Shipping Charges and Tax will be added.
Our price: $40.00
Our price: $40.00
Single Stage with Piggy Back Cord
Our new series of controls with 115 volt piggy back cord?s are designed to be used with our series of no electrician required exhaust fans, re-circulation fans and power shutters. All these products come complete with cord. You plug the control into the wall receptacle and then plug the fan or inlet into the back of the control cord. When using an existing circuit you must make sure the circuit will handle the motor amp capacity. This thermostat can be used for heating and cooling, exhaust fans, re-circulating fans, inlets and heaters. The plastic NEMA 4 housing with stainless steel sensor is ideal for any harsh environment including hog, poultry, dairy barns, greenhouses, high moisture applications, industrial and commercial buildings. Although loaded with features, it is priced well below most lower quality controls available in the market today.
Features
* NEMA 4 enclosure
* Stainless steel sensor
* Maximum setting 120F or 50C
* CSA/NRTLC (UL Equivalent)
* 8' Piggy back cord 120 volt
* Heating or cooling
* Temperature range 32F-104F 0C-40C
* One-year warranty
* Includes water proof wire connector
* 12 Amps
Note: All VC15?C are wired for 120 V. If you want to use for any other voltage the cord can be removed and hard wired. We recommend using a qualified electrician for this or purchase our VC15 without cord.
All controls should never be loaded by more than 80% of the motor or heater nameplate current amps.
Features
* NEMA 4 enclosure
* Stainless steel sensor
* Maximum setting 120F or 50C
* CSA/NRTLC (UL Equivalent)
* 8' Piggy back cord 120 volt
* Heating or cooling
* Temperature range 32F-104F 0C-40C
* One-year warranty
* Includes water proof wire connector
* 12 Amps
Note: All VC15?C are wired for 120 V. If you want to use for any other voltage the cord can be removed and hard wired. We recommend using a qualified electrician for this or purchase our VC15 without cord.
All controls should never be loaded by more than 80% of the motor or heater nameplate current amps.
**Applicable Shipping Charges and Tax will be added.
Our price: $58.33
Our price: $58.33
- per page
