High Pressure Misting System (1000 psi) – Copper Tubing

Starting at: $1,671.00

Add on Accessories

Benefits of Scale X Filter: The Scale X filter effectively inhibits the formation of calcium-carbonate scale to keep your nozzles cleaner longer. Add a Scale X filter to your pump; minimize nozzle maintenance; enjoy your misting system hassle free.

Benefits of Low Pressure Switch: The low pressure switch protects your 1000 psi pump from damage if the water supply is accidentally turned off. The switch prevents the pump from turning on which saves the pump from over-heating and damaging the internal seals.

Product price
Additional options total:
Order total:

 

A copper high pressure misting system (1000psi) from Advanced Misting Systems can reduce the temperature of your outdoor area by 30 degrees! The biggest advantage a high pressure misting system has over a low (150psi) or mid (300psi) pressure system is that the 1000psi pump produces a water droplet that is much smaller, a smaller water droplet means the evaporation is quicker, and this equals a lower temperature drop!

Our copper high pressure misting systems are premium quality and include all the parts and fittings needed for installation (see full parts lists below). Our 1000 psi misting kits are designed for easy installation, the average DIYer should have no problems with installation.

WHAT PUMP & LENGTH DO I NEED?

A big advantage of buying from Advanced Misting Systems is our experience, owner Mike has 20+ years experience with misting systems – if you have any questions don’t hesitate to call us at 760-779-1352. The steps listed below should be enough information for you to make the necessary choices to configure and purchase your high pressure misting system.

SELECT PUMP TYPE

Direct Drive: This pump is the most cost-effective, and it gets the job done for just about every application.

Enclosed Direct Drive: This is the same pump as the Direct Drive in an enclosing. This offers more protection and is quieter.

MEASURE LENGTH

Measure the outside perimeter of the area you want to cool with a misting system. And then measure the distance from the area you want to cool, to your water/electrical source. Take the outside perimeter measurement and add the measurement to your water/electrical source, and then add roughly 10% for good measure – this total would be the length you will need to select.

Reviews

There are no reviews yet.

Be the first to review “High Pressure Misting System (1000 psi) – Copper Tubing”

Parts Included

All of our copper high pressure misting kits come with a 1000 psi misting pump of your choice (Direct Drive, Enclosed Direct Drive), 50 feet of nylon manifold line, 3 elbows and 1 anchor kit. All other parts will depend on the length and tubing type, see below for specific parts list for our copper tubing kits.

Length6 Ft. Copper LinesMisting NozzlesBrass UnionsBrass EndcapsBrass Elbows6 Ft. Blank Copper TubesRubber Clamps50 Ft. Nylon Tube Roll
305 159133201
366 189133281
427 2111133281
488 2411133341
549 2713133361
6010 301413401
7212 3616133481
8414 4217133521

Nozzle and Motor Chart

Pump0.008 Nozzles0.012 Nozzles0.014 NozzlesPowerMotor
1/3 GPM7-155-104-8120 Volt 60 Hz, 8.4 Amps3/4 HP Motor 1725 RPM
1/2 GPM11-258-187-15120 Volt 60 Hz, 8.4 Amps3/4 HP Motor 1725 RPM
1 GPM25-5017-3515-31120 Volt 60 Hz, 8.4 Amps3/4 HP Motor 1725 RPM
1.5 GPM37-7526-5323-47120 Volt 60Hz 14 Amps1.5 HP Motor
2.1 GPM 50-10037-7523-47120 Volt 60Hz 15 Amps1.5 HP Motor 1725
2.9 GPM72-14552-10445-90220 Volt 60Hz 10 Amps2 HP Motor