Medium Duty 3/8” Brass Tee

Medium Duty 3/8” brass compression tee. Tee can be used to connect 3/8″ tubing together and to divert the flow of water to other areas of misting and/or fogging systems.

Compression type fitting. Can be used with nylon, copper or stainless steel tubing. Rated high pressure, 1000 psi.

Assembly Instructions: 1. Loosen the nut on the fitting 2. Insert the tube into the fitting, be sure the tube is bottomed on the fitting shoulder 3. Hand-tighten, then wrench the nut until it is snug and does not leak.