Mid Pressure Misting System (300 psi) – Stainless Steel
Starting at: $1,242.00
A mid pressure misting system from Advanced Misting Systems can cool your residential outdoor area by 15 degrees. The biggest advantage over a low pressure system (150 psi) is that the mid pressure (300 psi) pump produces a water droplet that is much smaller, which in turn means the evaporation happens faster — and this equals a lower temperature drop overall.
Our mid pressure misting systems are premium quality and include all the parts and fittings needed for installation (see full parts lists below). Our 300 psi misting kits are designed for easy installation, the average DIYer should have no problems with installation.
Specifications:
- Quiet Operation
- Inlet Solenoid Valve
- 5-Micron Filtration
- Outdoor Rated/Weather Resistant
- On/Off Switch
- Anti-Drip Nozzles
- Simple Installation
WHAT LENGTH DO I NEED?
A big advantage of buying from Advanced Misting Systems is our experience, owner Mike has 20+ years experience with misting systems – if you have any questions don’t hesitate to call us at 760-779-1352. The steps listed below should be enough information for you to make the necessary choices to configure and purchase your mid pressure misting system.
MEASURE LENGTH
Measure the outside perimeter of the area you want to cool with a misting system. And then measure the distance from the area you want to cool, to your water/electrical source. Take the outside perimeter measurement and add the measurement to your water/electrical source, and then add roughly 10% for good measure – this total would be the length you will need to select.
STAINLESS STEEL COLOR OPTIONS
The powder coating color options are available for stainless steel only. There are 6 powder coated color options: Almond (off-white), Caramel (light brown), Cafe (medium brown), Rust (dark brown/red), Black and Grey.
The color options are an additional cost – when you choose from the Stainless Color option above, the price will automatically be adjusted.
WHAT PARTS ARE INCLUDED?
All of our mid pressure misting kits come with a 300PSI enclosed misting pump, 50 feet of nylon manifold line, 3 elbows and 1 anchor kit. All other parts will depend on the length and tubing type, see below for specific parts list for our stainless tubing kits.
You must be logged in to post a review.
| Length | 8ft Stainless Steel Lines | Misting Nozzles | Stainless Steel Unions | Stainless Steel End Caps | Stainless Steel Elbows | 8ft Blank Stainless Steel Tubes | Clamps | 50ft Nylon Tube Roll |
|---|---|---|---|---|---|---|---|---|
| 16 | 2 | 8 | 3 | 1 | 3 | 1 | 25 | 1 |
| 24 | 3 | 12 | 3 | 1 | 3 | 1 | 25 | 1 |
| 32 | 4 | 16 | 4 | 1 | 3 | 1 | 25 | 1 |
| 40 | 5 | 20 | 5 | 1 | 3 | 1 | 30 | 1 |
| 48 | 6 | 24 | 6 | 1 | 3 | 1 | 35 | 1 |
| 56 | 7 | 28 | 7 | 1 | 3 | 1 | 35 | 1 |
| 64 | 8 | 32 | 8 | 1 | 3 | 1 | 45 | 1 |
| 72 | 9 | 36 | 9 | 1 | 3 | 1 | 45 | 1 |
You may also like…
-
3/8″ High Pressure Nylon Tubing Rolls
Starting at: $37.58 Select options -
Heavy Duty Stainless End Cap
Starting at: $9.03 Select options -
Low Pressure Stainless Anti Drip Nozzle 10/24
$8.25 Select options -
Heavy Duty Stainless Elbows
Starting at: $18.95 Select options -
Heavy Duty Stainless Unions
Starting at: $15.02 Select options
Reviews
There are no reviews yet.