Mid Pressure Misting System (300 psi) – Nylon
Starting at: $1,269.00
Product Description
A mid pressure misting system from Advanced Misting Systems can cool your residential outdoor area by 15 degrees. The biggest advantage over a low pressure system (150 psi) is that the mid pressure (300 psi) pump produces a water droplet that is much smaller, which in turn means the evaporation happens faster — and this equals a lower temperature drop overall.
Our mid pressure misting systems are premium quality and include all the parts and fittings needed for installation (see full parts lists below). Our 300 psi misting kits are designed for easy installation, the average DIYer should have no problems with installation.
WHAT LENGTH DO I NEED?
A big advantage of buying from Advanced Misting Systems is our experience, owner Mike has 20+ years experience with misting systems – if you have any questions don’t hesitate to call us at 760-779-1352. The steps listed below should be enough information for you to make the necessary choices to configure and purchase your mid pressure misting system.
MEASURE LENGTH
Measure the outside perimeter of the area you want to cool with a misting system. And then measure the distance from the area you want to cool, to your water/electrical source. Take the outside perimeter measurement and add the measurement to your water/electrical source, and then add roughly 10% for good measure – this total would be the length you will need to select.
Additional Information
| Length | 66, 58, 72, 70, 73, 63, 74 |
|---|
WHAT PARTS ARE INCLUDED?
All of our mid pressure misting kits come with a 300PSI enclosed misting pump, 50 feet of nylon manifold line, 3 elbows and 1 anchor kit. All other parts will depend on the length and tubing type, see below for specific parts list for our nylon tubing kits.
| Length | 2ft Nylon Lines | Misting Nozzles | Push Lock Unions | Push Lock End Plugs | Push Lock Elbows | Push Lock Tees | Clamps | 50ft Nylon Tube Roll |
|---|---|---|---|---|---|---|---|---|
| 30 | 14 | 15 | 15 | 2 | 3 | 1 | 25 | 1 |
| 40 | 19 | 20 | 20 | 2 | 3 | 1 | 30 | 1 |
| 50 | 24 | 25 | 25 | 2 | 3 | 1 | 35 | 1 |
| 60 | 29 | 30 | 30 | 2 | 3 | 1 | 40 | 1 |
| 70 | 34 | 35 | 35 | 2 | 3 | 1 | 45 | 1 |
| 80 | 39 | 40 | 40 | 2 | 3 | 1 | 50 | 1 |
| 90 | 44 | 45 | 45 | 2 | 3 | 1 | 55 | 1 |
Customer Reviews
5 reviews for Mid Pressure Misting System (300 psi) – Nylon
You must be logged in to post a review.
You may also like…
-
Push Lock Nozzle Union
Starting at: $10.03 Select options This product has multiple variants. The options may be chosen on the product page -
Mid Pressure Misting System (300 psi) – Stainless Steel
Starting at: $1,242.00 Select Options This product has multiple variants. The options may be chosen on the product page -
Mid Pressure Misting System (300 psi) – Copper
Starting at: $1,250.00 Select options This product has multiple variants. The options may be chosen on the product page -
Push Lock Coupling 3/8″
$7.72 Add to cart -
Push Lock End Plug 3/8″
$1.87 Add to cart -
Push Lock Elbow 3/8″
$12.25 Add to cart -
Low Pressure, Brass, Anti-Drip Nozzles 10/24
$6.25 Select options This product has multiple variants. The options may be chosen on the product page -
3/8″ High Pressure Nylon Tubing Rolls
Starting at: $37.58 Select options This product has multiple variants. The options may be chosen on the product page -
Low Pressure Stainless Anti Drip Nozzle 10/24
$8.25 Select options This product has multiple variants. The options may be chosen on the product page
Related products
-
24″ Non-Oscillating 6 Nozzle Misting Fan
$595.00 Add to cart -
High Pressure Misting System (1000 PSI) – Stainless Steel Tubing
Starting at: $1,850.00 Select Options This product has multiple variants. The options may be chosen on the product page -
150psi Pump 20′ or 40′ Misting Kit
Starting at: $347.00 Select options This product has multiple variants. The options may be chosen on the product page -
High Pressure Misting System (1000 PSI) – Copper Tubing
Starting at: $2,108.00 Select Options This product has multiple variants. The options may be chosen on the product page
Ed G –
I’ve had this misting system for almost a whole year. I would definitely recommend it to beginners who haven’t done an install before. As far as misting systems go this one gets the job done. Water pressure is consistent and not too much. The mist is fine. I just wish there was a bit more customization but it works great out of the box.
Tammy –
Ashley was so nice and explained the difference between this one and the copper one. I went with this one because she said it would be easier to install. I did it on my own over the weekend and now i can watch my kids play in the backyard and eat ice cream with them. Love it!
Shawn B. –
THANK YOU! writing this from my porch. Mike recommended this model to me and said the 40 would be more than enough and he was right. Came fast and was easy to install. Mist pressure is perfect for staying cool without getting my chair wet
Lou I. –
I dont remember her name but the agent that helped me pick this out was so kind! Delivery was fast and only took a few hours to install. It was my first time installing anything in my backyard but the instructions were clear and it only took a few hours. The mist evaporates as it touches me so my clothes dont get wet. I like it.
Olivia Thompson –
I’m an elementary school principal and my faculty have been asking for a misting system for our playground for months. We purchased a Mid Pressure Misting System this year and have been very impressed by its performance! It keeps the playground and children cool during recess. Our groundskeeper said the installation was very straightforward thanks to the comprehensive parts list and instructions. I highly recommend it for schools and any outdoor area requiring reliable cooling solutions.