Oil Extractor Pump

Product Description

The plunger shaft is thick aluminum and it has two plunger seals, designed not to leak or lose any pressue. 

The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose.

To set up, push the hose into the end of the oil extractor until it is locked into place. One secure, you will not have to worry about it disconnecting

To remove the hose, pull back on the white plastic collar that the hose inserts into. It’s spring loaded and it will move slightly, when it does, the hose can be pulled out easily for cleaning or storing.